until we ship warehouse goods.
+49-208-7772478-0

Kontakt

Deutschland0049 - 208 - 777 2478 - 0

United Kingdom0044 - 203 - 80858 - 32

Frankreich0033 - 1 - 763600 - 38

Spanisch0034 - 91 - 18757 - 97

Some Key Points to Consider in the Process of Storing Fiber Optic Cable:

gbic-shop.de
2020-06-01 / Deutsch

Fiber optic wires are very touchy to immoderate dragging; molding, crumbling, twiddling and further effective causes, and this course of action can give rise to damage to its power and potential and can change the fiber belongings.  Hence, optical wire needs to be controlled and kept in a proper manner. The given article provides the points in five major exposures with full explanation for fiber optic wire memory.

How to Transfer Cable Drum Precisely Before Storage:

 

It is essential to transfer an optical fiber accurately before reserving it, as various optical fibers are weighty. For fiber transference cable drum transport is classified among the familiar techniques. The wire reel should be advanced properly by raising the wire with the help of a reel institutor, in case the wire is too much weighty to raise it physically. In course of transference or utilization, a wire reel should not be unhandled from some high point. Some satisfactory mechanical help or the utilization of an elevator should be applied at the time of unpacking cable reel from a conveyance. The reels should not be dropped down from the conveyance.

 

One has to handle the drum in a suitable way while transporting or controlling it, in order to keep the fiber optic wire away from any harm.

Cranes are needed for several drums which are of enough weight and length to pack them or unpack them from conveyance. In a state of such conditions, in order to prevent the drum flanges to be crushed by the elevating bonds, a rod of adequate length for scattering things is required.

The Suitable Location for Fiber Optic Cable to be Stored:

Whatever the situation might be, the wire cartons or reels should not be kept in severe conditions or outdoors. Rather, in a dried UV secured place these wires should be kept. For keeping the cables a location should be selected where there is no danger of chemical falls, immoderate moistness, dropping things, extreme warmth or open fire. At the time of choosing location, components such as humidity and further impurities should also be kept in mind.

NOTE: The image of the reel can be hurt or harmed by the variable conditions of weather, if the wires are kept outside. That’s why inside storage of all reels is suggested.

Conditions of Storing Fiber Optic Wire:

 

At the time of the storage of fiber optic wires, one has to take notice of the following four conditions. For the entire presentation of the optical wires, these conditions are of great importance.

STORE BY LABELLING:

Every time the reel that comes along with wire it should be labeled. The important details on the label show the attenuation, length of wire, bandwidth and specification of cable. For expected traceability, all of these are logical recognition of the fiber optic wire.

THE DRUM SHOULD BE KEPT EQUALLY BURDENED ON A LEVELED AND HARD PLACE:

Fiber optic wire reel should be stored positioning on a leveled and hard place. A wire reel should always be positioned on two flanges, if it is stored while standing on one flange, the outcome of it will be some future destruction at the time of unbending.

SAFETY END CAPS SHOULD BE KEPT ON THE FIBER WIRE:

It should be confirmed that the safety end-caps are kept on the wire. In order to stop the entry of humidity into the finishing point of the wire, the end caps are created. They provide security to the very touchy point of the fiber groups. The central part of the wire will be disclosed to the impurities which are prevailing in the nearby atmosphere if the end caps are detached from the cable, and this detachment extends the danger of fiber denting and scraping.  WHEN EXCHANGING REELS THE MINIMUM CURVING RADIUS SHOULD NOT BE SURPASSED: The fresh reel’s diameter should not be lower than the lowest curving radius of fiber when the fiber optic wire reversed to a new reel. Furthermore, the actual wire’s tag information should be transferred to the fresh reel.

 

Checking and Preservation after the Process of Storage:

The careful examination and preservation of fiber is also a matter of significance, after the storing process. We can realize the upcoming danger which is produced in the process of storing fiber optic wire, by the way of careful examination. A heat shrink cover can be tried to make sure that on the exterior surface of the wire is a stiff cap, in the situation when the end cap is missing.

Security Concerns after the Storage of Optical Fiber:

For the purpose of security, we see there are various details one has to take notice of them. Some major conditions are given below.

  • One has to put on disposable aprons in order to abstain from fiber pieces on dress and all the foodstuffs and drinks should be kept away from the working place. The fiber pieces may give rise to inner hemorrhaging if they are entered.
  • One has to put on eye glasses covered from sides, proper helmet for security and a covering for hands for safety. At the time of operating with fiber optic structure, hands should not come into contact with eyes.
  • On no account one has to see straight at the finishing point of fiber wires except no brightness is there at the finishing point.
  • When operating with fiber optic structures, one has to stop smoking and should work only in some breezy atmosphere.
  • After operating with optical fiber wires, one has to clean his hands with intense care.
  • The usage of isopropyl alcohol for the cause of cleansing hands is not good because it is burnable.

Furthermore, in the purpose of storage safety for fiber optic wire, there are various points while utilizing optical fiber. For instance, make an effort to evade from dragging the optical wire forcefully, evade from intense curving of the optical wire and to arrange light safety for the optical wire.


News